OPERATION MANUAL
IBS 40002210
Page | 16
V13 (January 2019)
Ambient Individual Zones/Tiers
WARNING
In an emergency, switch off the appliance and isolate fully from the mains supply.
Ensure that you take time to familiarise yourself with this location.
CAUTION
When switching from hot mode to ambient mode, the surface of the zones will remain
hot for a period of time. Ensure that the unit has sufficiently cooled before placing
ambient products into the zone.
Switch on the zone power switch and the display will illuminate. The display will show the ambient
temperature.
To select the ambient mode:
Press the heating enable/disable button and the display will read ‘OFF’. Visually, you will see that the fan
has stopped rotating and there is no air circulating around the zone. The zone is now in ambient mode.
Where multiple ambient zones are required, select and set the appropriate heating enable/disable button
to ‘on’ separately.
No products should enter the display area until the zone has cooled adequately to the required ambient
temperature.
To reactivate the heating mode
:
Press the heating enable/disable button and the display will read the current operating temperature.
Visually, you will see that the fan has started rotating and air is now circulating around the zone. The zone
is now in heating mode.
Zone power switch
I: On
position
O: Off
position
Programmer display
Heating
enable/disable
button
