MODELS CFC56BR • CFC56WH
Page 5
FINISH INSTALLATION
1. Tuck connections neatly into ceiling outlet box.
2. Slide the canopy up to mounting bracket and place the key hole on
the canopy over the screw on the mounting bracket, turn canopy
until it locks in place at the narrow section of the key holes. (Fig. 13)
3. Align the circular hole on canopy with the remaining hole on the
mounting bracket, secure by tightening the two set screws.
Note: Adjust the canopy screws as necessary until the canopy and
canopy cover are snug.
Warning: Make sure tab at bottom of hanger bracket is properly
seated in groove of hanger ball before attaching canopy to bracket.
Failure to properly seat tab in groove could cause damage to
electrical wiring.
ATTACH FAN BLADES
1. Fasten blade assembly to motor using the screws supplied. (Fig.
14)
2. Repeat for the two remaining blades.
FIGURE 13
OUTLET
BOX
HANGER
BRACKET
CANOPY
CANOPY
COVER
SCREWS
FIGURE 14
SCREWS
BLADES
