MODELS CFC56BR • CFC56WH
Page 4
INSTALL SAFETY SUPPORT
1. An additional safety support is provided to prevent the fan from
falling. Secure the safety cable to the ceiling joist with screw and
washer, as illustrated in Figure 9.
HANGER
BRACKET
SAFETY CABLE
FIGURE 9
CONNECT WIRING
Remember to disconnect the power. Follow the steps below to connect
the fan to your building/facility wiring. Use the wire nuts supplied with
your fan. Secure the connectors with electrical tape. Make sure there
are no loose strands or connections.
1. Connect the fan supply (black) wire and light supply (blue) wire to
the black household supply wire as shown in Figure 10.
2. Connect the neutral fan (white) wire to the white neutral household
wire.
3. Connect the fan ground wire (green) to the building/facility ground
wire.
4. After connecting the wires, spread them apart so that the green and
white wires are on one side of the outlet box and the black and the
blue wires are on the other side.
5. Turn the connecting nuts upward and push the wiring into the outlet
box.
Figures 11 and 12 illustrate the wiring connections for optional wall
control (The wire color out of wall control may vary, see wall control’s
installation manual for correct wire connections.)
WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR
OTHER PERSONAL INJURY, MOUNT FAN ONLY ON AN OUTLET
BOX OR SUPPORTING SYSTEM MARKED ACCEPTABLE FOR FAN
SUPPORT.
FIGURE 12
GROUND TO
MOUNTING
BRACKET
OR DOWNROD
120 VAC
LINE IN
GREEN
GROUND
WIRING
BOX
H
W
E
U
L
B
K
L
B
K
L
B
WH
FAN
LIGHT
FAN
WIRING
BOX
GROUND TO
MOUNTING
BRACKET
OR DOWNROD
WH
WH
FAN
LIGHT
SWITCH
GREEN GROUND
FIGURE 11
BLUE
BLK
BLK
FIGURE 10
WH
WH
GRN
WIRING
BOX
GROUND TO
MOUNTING
BRACKET
OR DOWNROD
FAN
GREEN
GROUND
BLK
BLK
BLUE
120 VAC
LINE IN
120 VAC
LINE IN
OPTIONAL
WALL
CONTROL
OPTIONAL
WALL
CONTROL
