MODELS CFC56BR • CFC56WH
Page 2
CONTENTS
Unpack your fan and
check the contents.
You should have the
following items:
A - Blade Set (3)
B - Hanger Bracket
Assembly
C - 6” Downrod
D - Coupling Cover
E - Fan Motor
Assembly
F - Package Hardware:
Mounting Hardware
2 screws, 2 wood
screws, 2 washers,
4 lock washers,
3 wire nuts
Balance Kit
TOOLS & MATERIALS
REQUIRED
PHILLIPS
SCREW
DRIVER
FLAT
BLADE
SCREW
DRIVER
11mm
WRENCH
STEP
LADDER
WIRE
CUTTER
A
B
C
D
E
F
MOUNTING OPTIONS
If there isn’t an existing UL listed mounting box, then read the following
instructions. Disconnect the power by removing fuses or turning off
circuit breakers.
Secure the outlet box directly to the building structure. Use appropriate
fasteners and building materials. The outlet box and its support must be
able to fully support the moving weight of the fan (at least 50 lbs). Do
not use plastic outlet boxes.
Figures 1,2 and 3 are examples of different ways to mount the outlet box.
Note: You may need a longer downrod to maintain proper blade clearance
when installing on a steep, sloped ceiling. (Fig. 3)
To hang your fan where there is an existing fixture but no ceiling joist,
you may need an installation hanger bar as shown in Figure 4.
OUTLET BOX
PROVIDE STRONG
SUPPORT
RECESSED
OUTLET BOX
CEILING
MOUNTING
PLATE
OUTLET BOX
FIGURE 1
FIGURE 3
FIGURE 4
OUTLET BOX
FIGURE 2
