NuTone 742RBNT Скачать руководство пользователя страница 4

Page 4

MODELS  742RBNT • 742WHNT • 742SNNT

USE AND CARE

USE AND CARE

WARNING: DISCONNECT ELECTRICAL POWER SUPPLY AND
LOCK OUT SERVICE PANEL BEFORE CLEANING OR SERVIC-
ING THIS UNIT.

BULB REPLACEMENT

Remove finial nut and cap and remove glass shade. Replace bulb
or bulbs as required. Replace glass shade, finial cap & securely
tighten finial nut. Use 60 Watt maximum incandescent bulb.

MOTOR LUBRICATION

The motor is permanently lubricated. Do not oil or disassemble
motor.

CLEANING

TO CLEAN GLASS SHADE AND GRILLE PAN:

Remove finial nut and finial cap and remove glass shade. Shade
can be wiped clean with a mild detergent solution or glass cleaner
and dried with a soft cloth. Remove 2 bulbs. Grille pan may be gen-
tly vacuumed and wiped clean with a soft cloth. Never use abrasive
cloth, steel wool pads or scouring powders on glass shade or grille
pan. METAL AND ELECTRICAL PARTS SHOULD NEVER BE IM-
MERSED IN WATER.

TO CLEAN FAN ASSEMBLY:

Remove grille pan and unplug fan assembly (black receptacle).
Gently vacuum fan, motor and interior of housing. METAL AND
ELECTRICAL PARTS SHOULD NEVER BE IMMERSED IN WATER.

WARRANTY

99043341B

NUTONE ONE YEAR LIMITED WARRANTY

Nutone warrants to the original consumer purchaser of its products that such products will be free from defects in materials or workmanship for a period of one year from the date of original purchase. THERE ARE NO OTHER WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
During this one-year period, Nutone will, at its option, repair or replace, without charge, any product or part which is found to be defective under normal use and service.
THIS WARRANTY DOES NOT EXTEND TO FLUORESCENT LAMP STARTERS AND TUBES. This warranty does not cover (a) normal maintenance and service or (b) any products or parts which have been subject to misuse, negligence, accident,
improper maintenance or repair (other than by Nutone), faulty installation or installation contrary to recommended installation instructions.
The duration of any implied warranty is limited to the one-year period as specified for the express warranty. Some states do not allow limitation on how long an implied warranty lasts, so the above limitation may not apply to you.
NUTONE’S OBLIGATION TO REPAIR OR REPLACE, AT NUTONE’S OPTION, SHALL BE THE PURCHASER’S SOLE AND EXCLUSIVE REMEDY UNDER THIS WARRANTY. NUTONE SHALL NOT BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL
OR SPECIAL DAMAGES ARISING OUT OF OR IN CONNECTION WITH PRODUCT USE OR PERFORMANCE. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may
not apply to you.
This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state. This warranty supersedes all prior warranties.
To qualify for warranty service, you must (a) notify Nutone at the address stated below or telephone: 1-800-543-8687, (b) give the model number and part identification and (c) describe the nature of any defect in the product or part. At the
time of requesting warranty service, you must present evidence of the original purchase date.

NuTone, Inc. 

4820 Red Bank Road, Cincinnati, Ohio 45227 (1-800-543-8687)

SERVICE PARTS

KEY

PART NO.

DESCRIPTION

1

97015574

Finial Nut - Satin Nickel

97013914

Finial Nut - White

99524951

Finial Nut - Oil-Rubbed Bronze

2

97015575

Finial Cap - Satin Nickel

97013916

Finial Cap - White

99524950

Finial Cap - Oil-Rubbed Bronze

3

99523652

Shade Mounting Rod

4

99524076

Washer

5

97015320

Lamp Socket (2 req.) (Includes

mounting washer and nut)

6

97015313

Wire Harness

7

99260428

Motor Nut, #6-32 Hex (2 req.)

8

99150618

Grille Screw

9

97014926

Motor Plate

10

99080559

Motor

11

99020276

Blower Wheel

12

99270981

Lamp Receptacle, White

13

99270982

Motor Receptacle, Black

14

98009612

Wiring Panel

15

99150471

Ground Screw

16

99170245

Screw, #8-18 x 3/8”

17

98008868

Wiring Plate

18

97014185

Damper/Duct Connector

19

97014922

Housing Assembly

A

99523770

Light Fixture Assembly (742SNNT)

(Includes Glass Shade,
Grille/Pan and Key Nos. 1
thru 6)

99523700

Light Fixture Assembly (742WHNT)

99524948

Light Fixture Assembly (742RB)

B

97016381

Blower Assembly

(Includes Key Nos. 7 thru 11)

C

97015171

Wire Panel Assembly

(Includes Key Nos.12, 13, 14)

Order replacement parts by “PART NO.” - not by “KEY NO.”

1

2

3

5

6

18

19

4

7

8

9

10

11

12

13

14

16

17

A

B

C

15

Содержание 742RBNT









Отзывы: