Nutfield Technology 3XB, Руководство пользователя

Страница: 15 / 32

15
g. In the Mode field, select the appropriate laser type.
h. Power ON the 3XB’s +/-15VDC power supply.
NOTE: GREEN LEDs will be illuminated on the 3XB’s servo boards. There should
be no RED LEDs illuminated, the galvo’s mirrors should be stiff and not be
moving.
i. Power ON the Laser Power Supply. Test fire the laser and confirm its output.
8.7 Focus Adjustment
a. Confirm the Y-Radius is set properly. Reference the Outline Drawing in Section
11.
b. In the WaveRunner application, draw a small ~1cm x 1cm entity in the middle
of the mark field.
c. Place a piece of scrap material in the center of the mark field.
d. In WaveRunner, select the Mark menu item, and the submenu Start. A Mark
field will appear, click the repeat check box, then the Start Mark button.
CAUTION: The following step will cause the laser to fire. Take all appropriate
precautions.