Nutfield Technology 3XB, Руководство пользователя

Страница: 13 / 32

13
8.5 Connect the Power Supply
NOTE: 3-Axis systems are typically shipped with an external power supply and cable
with a 9-pin connector. If you have not ordered a power supply with your 3-Axis system,
reference the Specifications section of this manual for detailed power requirements.
a. Confirm the primary power is not connected to the power supply and it is not powered
ON.
b. Connect the 9-pin power cable to the 3XB’s Power Input connector.
8.6 Start the WaveRunner application.
a. Using the supplied USB cable, connect the Scan Controller to the PC.
b. Open the WaveRunner application by Clicking on the WaveRunner icon.
c. When asked for the License Key, enter the 16 – 24 character code supplied with the
Scan Controller.
d. Once the application opens, pull down the Settings menu, and go to the System
submenu. Under the System menu, click the Optic Tab.
e. In the Lens field, click the Browse button. Point WaveRunner to the correction file you
generated previously using CorCalcII. Note that the Size field now represents the
Requested Field entered into CorCalcII.