Nustart NU1500R, Руководство пользователя

Страница: 3 / 12

5 By Firstech, LLC By Firstech, LLC 4
Quick Reference
The only regular maintenance this system requires is remote control battery replacement. No programming is required when replacing the battery.
One-Way Remote: Model NU 1500R (US Style)
First, remove the small Phillips screw located on the back of the remote. Once the screw has been removed, gently pull the remote apart taking care
to not touch the circuit board. These remotes require two CR2025 batteries. These specialty batteries can be purchased from your local NuStart
dealer or an electronics store.
IMPORTANT:
Be sure to observe correct polarity when installing the battery
r ” @m‰Ž” ŽŽƒ Mb”” ’™@r Œƒ  Ž”
Quick Reference
Qw™@r ” @b•””Ž@f•Žƒ”‰Ž“
Button Duration Additional Programming Function / Description
Required
0.5 seconds no Locks doors and/or arms alarm.
3.5 seconds no Panic/vehicle locater (flashes vehicle’s parking lights and sounds siren and horn)
0.5 seconds no Unlocks doors and/or disarms alarm.
0.5 seconds no Aux 1. Triggers the auxiliary 1 output (most commonly used for rear defrost or window roll-down)
2.5 seconds no Trunk pop. Triggers the trunk release output and opens the vehicle’s trunk.
0.5 seconds no Aux 2. Triggers the auxiliary 2 output (most commonly used for rear defrost or window roll-down)
2.5 seconds no Activates the remote start. Repeat and remote start will shut off
0.5 seconds no Turns siren on/off (Note: With the siren off, it will still sound in the event the alarm is triggered)
2.5 seconds no Option programming menu 1 - Installers Only
0.5 seconds no Valet mode (see Valet Mode section for details)
2.5 seconds no Turns the shock sensor on/off. (Alarm or Alarm/Starter systems only)