15 By Firstech, LLC
By Firstech, LLC 14
Advanced System Functions
t@t @m
The built in turbo timer keeps the vehicle’s engine running for either 1, 2, or 4 minutes (programmable from dealer with Option 2-2)
after the vehicle key has been removed from the ignition. This feature will keep oil running through the turbo system to allow for
appropriate cooling time. Tap buttons simultaneously for 0.5 seconds to turn on or off turbo mode. The vehicle’s parking
lights will flash once and/or siren chirp once to confirm turbo mode is on. The vehicle’s parking lights will flash twice and/or siren chirp
twice to confirm turbo mode is off.
IMPORTANT:
To utilize this feature, the emergency / parking brake wire must be connected to the NuStart system. Consult your local authorized
NuStart dealer for installation.
t @s@m
Timer start mode is used to cool or warm the vehicle without manually starting with the key or from the NuStart remote. While
engaged, timer start will activate even while the remote is out of range. Tap buttons simultaneously for 0.5 seconds to
activate timer start mode. Timer start mode will be cancelled any time the vehicle is started manually or remotely. To change from the
default setting to optional settings, see your local NuStart dealer.
Default 1:
Will start every 3 hours for a 24 hour cycle, or until the vehicle is remote started or started by key, and run for 4 minutes (8 minutes for diesel).
Option 2:
Will start every 1.5 hours for a 24 hour cycle, or until the vehicle is remote started or started by key, and run for 4 minutes (8 minutes for diesel).
s @v @s
The optional Secure Valet Switch prevents the alarm from being put into valet mode through cycling the ignition on/off five times. The Secure Valet
Switch is more secure than traditional toggle / valet switches because it requires a two digit code. IMPORTANT: The first two digits of the RPS
unlock/disarm pass code will be the default pass code for the secure valet - you do not need to program them independently. If you are not using the
RPS unlock, following the below procedures to program your secure valet pass code;
STEP 1:
Turn on Option 3-10-III. (Dealer programmed option)
STEP 2:
Turn ignition key to the “on” position.
STEP 3:
Hold down the valet switch for 1.5 seconds. The LED on the valet switch will begin to flash rapidly with successful completion of this step.
STEP 4:
Enter the first digit of the desired two digit pass code by depressing the switch the number of times that coordinates with the desired first
number. For example, to enter 3, depress the switch 3 times, then wait.
STEP 5:
The LED will confirm the first number by flashing BLUE slowly. Once the LED begins to flash rapidly, enter your second number by repeating step 4.
STEP 6:
Turn the ignition off - the Secure Valet Switch is now programmed. Follow steps 3 - 5 to enter your Secure Valet code.
Advanced System Functions
The NuStart systems have a built in mode that would require you to keep your remote separate from your key chain. This feature also requires
additional labor. Please consult your installer for more details. The Anti Jacking mode allows you to safely disable your vehic le once a thief has driven
off with your property. If you are car jacked and still have your remote, you can panic the system by holding button down for 4 seconds.
The siren will sound for 30 seconds and the motor of the vehicle will shut down.
anti@g@O@s @k
Содержание NU1500R
Страница 11: ...21 ByFirstech LLC ByFirstech LLC 20 Notes Notes...
Страница 12: ...23 ByFirstech LLC ByFirstech LLC 22 Notes Notes...
