Nussbaum UNI-LIFT 6500, Инструкция по эксплуатации и документация

Страница: 46 / 62

Opera ting instruction a nd documenta tion
UNI-LIFT 6500 - 8000
UNI LIFT 6500 - 8000 - 46 - Version 1.0
9.3 Initiation
Before the initiation the first security check needs to be performed. Use form
“First
security check”.
If the lift is installed by a competent person, he will perform this security check. If the operator
installs the lift by himself, he has to instruct a competent person to perform the security check.
The competent person confirms the faultless function of the lift in the installation record and the
form for the first security check and allows the operation of the lift.
Please send the filled installation record to the manufacturer after initiation.
• Hebebühne gemäß den Angaben des Maßblattes (Lageskizze der Bodenlager)
aufstellen und ausrichten.
9.4 Changing the installation place
If the place of installation shall be changed, the new place has to be prepared according to the
regulations of the first installation. The changing should be performed in the following process:
• Loosen the dowels at the base plate and operation panel.
• Lift up automotive lift 20 inch without vehicle.
• Underlay scantlings underneath the centre axis of the shears.
• Lower automotive lift until centre axis bears on scantling and loose bearing and fixed bearing
lift up from floor. Fix lift to prevent it from oscillating or tilting.
• Brace loose bearing and fixed bearing with rail.
• Loosen pneumatic and hydraulic pipes and electric cables.
• Transport the automotive-lift to its new location.
• Install the lift in accordance with chapter 9 “Installation and Initiation”.
Use new dowels, the old ones are not usable anymore.
A security check must be performed before re-initiation by a competent person. Use form
“Regular security check”.