A
Standard multiCHAIR 3000tx with transfer cushion installed on
user’s right side is shown in Figure 1.
B
Unpack all parts from the shipping carton. Remove all tape
and/or packing from the chair. Keep shipping materials for future
use. Note the location of padding materials and sheet plastic
which protects parts of your chair.
C
Open the seat frame, lock the slide bolts, and
position the frame upside down (Refer to Figures 2 & 3).
D
Position the seat frame upside down and install the four legs.
Note that the top of each leg has a machined portion approxi-
mately one inch wide. The top end of each leg should fit easily
into the socket of the frame. Make sure that the legs slide
"home" into the sockets. Use the included ¼" Allen wrench to
tighten the bolts located at the corners of the frame. For ease
of future leg height adjustment, position each leg in the socket
so that the adjustment holes face outward (Refer to Figures 3).
Slide bolts
ASSEMBLY INSTRUCTIONS
!ATTENTION: PLEASE READ!
Please see Page 6: LIMITED WARRANTY of these instructions. If the warranty is not acceptable, contact Nuprodx, Inc. for information
about returning the chair for a refund (Restocking fees and shipping charges will be applied). This chair is designed and intended for
indoor shower and bathroom use. It is not designed for outdoor use and will void the warranty if used in this fashion.
multiCHAIR 3000tx
and carrying case
Figure 2
Figure 3
SAFETY PRECAUTION!
If any of the legs are not fitted correctly into the socket of the seat
frame or are not securely tightened there is an extreme risk of the
legs dislodging completely from the chair. This could cause seri-
ous injury or even death!
SAFETY PRECAUTION!
Failure to ensure that the slide bolts are correctly positioned and
locked into place will cause the chair to become unstable. This
could cause serious injury or even death!
slide bolts
- PAGE 2 -
Figure 1
