48
To switch the machine off the main switch must
be pressed again.
Before carrying out any cleaning operations,
set the machine to the “O” energy level, (machi-
ne switched off and plug removed from the
mains).
Never use solvents, chlorine-based pro-
ducts, abrasives.
CAUTION
Cleaning the work area:
remove the worktop,
lifting it up from the front and sliding it out.
Remove the water collection dish underneath
and clean everything with hot water and clean-
sers.
Cleaning the external surfaces:
To clean the
panels, use a soft, damp cloth.
NOTE
:Only the
Cappuccino
version is equip-
ped with the milk foamer washer.
NOTE
:Follow the instructions on the label
applied on the inside of the front door.
NOTE
:Before starting the washing cycle check
and refill the level of water in the water
tank.
The machine is equipped to wash the delivery
unit with detergent tablets and the milk circuit
with liquid cleansers (Cappuccino version
only).
The machine will begin a wash cycle that con-
CAUTION
RISK OF INTOXICATION.
Fig. 29
Fig. 30
4. Press the following key:
OFF
OFF
9.
CLEANING AND MAINTENANCE
9.1
SWITCHING OFF THE
MACHINE
9.2
CLEANING THE OUTSI-
DE OF THE MACHINE
9.3
CLEANING THE DELI-
VERY UNIT AND Milk
Foamer:
Fig. 31
sists of hot water deliveries alternated with pau-
ses. The whole cycle lasts approximately 4
minutes.
We recommend that you carry out a WAS-
HING CYCLE at least once a day using spe-
cial cleansers.
Fig. 32
We remind you not to interrupt a washing
cycle using detergent tablets once started,
otherwise detergent residues may remain
inside the machine.
In order to execute the washing procedure pro-
ceed as follows (for coffee version go directly to
step 4):
1. Position a container with water beside the
machine.
2. Put the suction tube inside it.
3. Add the specific cleaning product (20 ml
[0.005 Gal] of
Puly Milk
).
ENGLISH
