Nuova Simonelli Oscar II, Руководство по обслуживанию

Страница: 10 / 84

1.3
SaFETY InDIcaTIOnS
The present manual is an integral and essen-
tial part of the product and is to be delivered
to the user. carefully read all warnings in
the manual as they provide important infor-
mation required to install, use and maintain
the unit safely. Keep this manual in a safe
place for further consultation.
after having removed the packaging,
make certain that the unit is not damaged
in any way.
If you have any doubts, do not use the unit
and contact a professionally qualified per-
son. always keep all packaging (plastic
bags, polystyrene foam, nails, etc..) out of
the reach of children as they are a poten-
tial source of danger and never loiter the
environment with such materials.
The machine is can be installed in staff
kitchen areas in shops, offices and other
working environments, farm houses by
clients in hotels, motels and other resi-
dential type environments bed and break-
fast type environments.
Before turning on the unit make certain
that the rating indicated on the label
matches the available power supply. The
nameplate can be seen inside the machine
when removing the water collection tray.
The machine must be installed according
to the applicable federal, state and local
standards (codes) in force with regard
to plumbing systems including backflow
prevention devices. For this reason, the
plumbing connections must be carried
out by a qualified technician.
The warranty expires if the characteristics
of the power supply do not correspond to
the nameplate data.
The manufacturer cannot be held respon-
sible for any damages incurred if the sys-
tem is not grounded.
For electrical safety, this machine requires
a ground system. contact a technically
certified electrician who must check that
the line electrical capacity is adequate for
the maximum capacity indicated on the
unit label.
The qualified electrician must also check
that the section of the installation’s cables
is large enough for the absorbed power of
the appliance.
never use adapters, multiple jacks or exten-
sion cords. When such items prove absolute-
ly necessary, call in a qualified electrician.
When installing the device, it is necessary
to use the parts and materials supplied with
the device itself. Should it be necessary to
use other parts, the installation engineer
needs to check their suitability for use in
contact with water for human consumption.
The installer must Make the hydraulic con-
nections respecting the rules of hygiene
and water safety to environmental protec-
tion in force in the place of installation. So
for the hydraulic plant contact an author-
ized technician. always utilise the new
hose supplied for connection to the water
supply. Old hoses must not be utilised.
The device needs to be supplied with
water that is suitable for human consump-
tion and compliant with the regulations
in force in the place of installation. The
installation engineer needs confirmation
from the owner/manager of the system
that the water complies with the require-
ments and standards stated above.
This unit must only be used for the pur-
poses described in the present manual.
The manufacturer cannot be held respon-
sible for any damages caused by improp-
er, mistaken and unreasonable use.
Ed. 02 of 09/2016
1.4
SErvIcE Manual
DanGEr OF POlluTIOn
Fig. 3
Fig. 4