Nuova Simonelli APPIA life 1 Group, Руководство пользователя

Страница: 14 / 76

• Preparation of the installation site.
The purchaser must prepare the surface on which the machine will stand suitable
to support the machine weight (see the installation chapter).
• Electrical requirements.
The mains power installation must comply with the safely regulations and stand-
ards in force in the country of installation and must include an efficient earth sys-
tem. An omnipolar cut-off device must be installed on the power line upstream of
the machine.
Under the senses of the Directives/ Guidelines 2011/65/
EU concerning the reduction of the use of dangerous
substances in electric and electronic equipment, as
well as the disposal of wastes“.
The symbol of the crossed large rubbish container that
is present on the machine points out that the product
at the end of its life cycle must be collected separate-
ly from the other wastes. The user for this reason will
have to give the equipment that got to its life cycle to
the suitable separate waste collection centres of electronic and electro-technical
wastes, or to give it back to the seller or dealer when buying a new equipment of
equivalent type, in terms of one to one.
The suitable separate waste collection for the following sending of the disused
equipment to recycling, the dealing or handling and compatible environment dis-
posal contributes to avoid possible negative effects on the environment and on the
people’s health and helps the recycling of the materials the machine is composed
of. The user’s illegal disposal of the product implies the application of administra-
tive fines as stated in Law Decree n.22/1997” (article 50 and followings of the Law
Decree n.22/1997).
PREPARATION BY THE PURCHASER
INFORMATION TO THE USERS
• Should you decide to stop using this type of unit, we
suggest you render it inoperable by unplugging it
and cutting the power supply cord.
• Never dispose of the machine in the environment:
to dispose of the machine, contact an authorized
center or contact the manufacturer for pertinent in-
dications.
14