VIS1053 - Indice A
–
Août 2020
9/30
4.
Power on / off
Press the « ON / OFF » button for approximately 3 seconds to activate the LCD display.
Press the « ON / OFF » button for approximately 3 seconds to turn the LCD display off.
5.
Screenshot
Press the the « ON / OFF » button for 1 second to « freeze » an image, to take a screenshot.
Press the the « ON / OFF » button for 1 second to « unfreeze » an image, to deactivate a
screenshot.
6.
Zoom in
Press the « ZOOM IN » button for 1 second to adjust the digital zoom. You can switch from a
zoom x1, to x2, to x3 or even to x4 ...
7.
Colors switch
Press the « COLORS SWITCH » button for 1 second to scroll through the color palette.
7 different colors patterns are possible:
-
White hot,
-
Purple hot,
-
Rainbow,
-
Amber hot,
-
Iron hot,
-
Black hot,
-
Red hot
Press the "COLOR SWITCH" button for 3 seconds to display a small square on the hottest
area.
8.
Cautions for use
−
The VIS1053 thermal vision monocular has an uncooled microbolometer detector that
uses a highly sensitive thermal sensor. The lens must not be directed towards a source
of radiation (such as the sun, a laser beam or a reflective source, etc.) whether the
product is switched off or on. The product would then be permanently damaged.
−
The lens is a fixed focus-free lens that does not need to be rotated during use,
otherwise it will cause image blur.
−
Do not open the case or alter it.
−
Keep the product out of reach of children.
−
Do not use any power source other than 3-V CR123 Lithium batteries.
−
Make sure the batteries polarity is correct.
−
Remove the batteries from the product if not used for an extended period.