Numatic TTV 678, Инструкция пользователя

Страница: 19 / 32

19
The Floor Tool
Changing the Floor Tool Blades
ALWAYS ENSURE THAT THE BATTERY IS DISCONNECTED
PRIOR TO ANY MAINTENANCE
!
!
35
36 37
Floor-tool overview
1. Floor-tool main body
2. Rear blade
3. Blade carrier
4. Front blade (slotted)
5. Retaining pins x 4
1
2
3
4
5
Note:
Floor-tool adjusters are factory set for optimal performance.
The blades are designed to be reversible, thus extending their useful working life.
To clean the floor-tool, remove securing-pin and disconnect the lifting strap and remove the floor-tool securing pin pull-free
the floor-tool from the rear of the machine.
Rinse the floor-tool assembly with clean-water and refit.
Periodically the floor-tool blades should be examined and checked for wear and damage.
The blade removal is easy. Simply start by removing the four retaining pins (see Fig.35), turn the floor-tool over and
separate the blade carrier from the body (see Fig.36). Peel away the blades from their locating lugs (see Fig.37) and
examine or renew as required. Replacement is a reversal of the removal process.
The TTV 678 is provided with the aluminium floor-tool shown.