Numatic TRG 720/200T, Оригинальное руководство пользователя

Страница: 14 / 28

14
www.numatic.co.uk
Changing the floor tool blades
Lower the floor tool then unscrew the retaining knobs and slide it off the holding bracket.
Rinse the floor tool assembly with clean water and refit.
Periodically the floor tool blades should be examined and checked for wear and damage.
Replacement is a reversal of the removal process.
4
2
3
1
5
Floor Tool Overview
1. Front blade (slotted)
2. Blade carrier
3. Rear blade
4. Floor tool main body
5. Retaining pins x 4
! !
Remove floor tool. Remove four retaining pins.
Turn the floor tool over. Separate the blade carrier from the main body. Peel away blades.
ALWAYS ENSURE THAT THE MACHINE IS SWITCHED OFF PRIOR TO ANY MAINTENANCE.
! !
NOTE: THE BLADES ARE DESIGNED TO BE REVERSIBLE,
THUS EXTENDING THEIR USEFUL WORKING LIFE.