Numatic TRG 720/200T, Оригинальное руководство пользователя

Страница: 9 / 28

Machine set-up guide
9
T (+ 44) 01460 68600
Low High
HEAVY
SO
ILIN
G
Adjusting the seat
Setting the cleaning controls
NOTE: MACHINE WILL NOT REVERSE WITH FLOOR TOOL IN THE LOWERED POSITION.
! !
1
1
2
2
3
3
Sitting in the driving position, adjust the seat forwards or backwards as necessary by using the lever
found on the left-hand side (see Fig 1, 2, 3).
Note: The seat is fitted with a pressure sensor that disables the machine until an operator is seated.
When in the area to be cleaned follow the instructions below to set up the machine ready for cleaning.
Sitting in the driving position follow steps 1 - 6.
The machine is now set up and ready to start cleaning, depress the accelerator pedal to start the cleaning process.
Adjust waterflow and speed according to floor type and level of soiling.
Insert the key into the ignition and quarter
turn it clockwise to the ‘ON’ position.
The battery charge level indicator will
illuminate.
Set direction switch to forward. Turn dial to set desired cleaning speed.
Turn dial to set desired water flow. Lower brush deck
by pushing down
on the pedal,
release handle and
raise foot pedal.
Lower floor tool
by lifting lever
upwards.
Press vacuum switch ON to turn on suction.
Slow
Forward
Reverse
OFF
OFF
ON
ON
Fast
IMPORTANT
DO NOT OPERATE MACHINE UNLESS THE OPERATOR MANUAL
HAS BEEN READ AND FULLY UNDERSTOOD.
! !
5 4 6