6
Operation
Performance Pad Modes
The upper row of pads has different functions depending on their mode: Manual Loop Mode,
Auto Loop Mode, and Sample Mode.
To select a mode, hold down the
Pad Mode
button and
press one of the upper pads.
An LED under the pad section indicates the currently selected
mode.
Manual Loop Mode:
Hold
Pad Mode
and press the pad marked
Manual Loop
to assign the
upper 4 pads to the functions listed below:
•
Loop In:
Sets the beginning of a loop. After a Loop Out point is set, when this button is
pressed again, it will allow for fine adjustment of the Loop In point.
•
Loop Out:
Sets the end point for the loop. When this button has been pressed after a Loop
Out point has been set, it will allow for fine adjustment of the Loop Out point.
•
On/Off:
When this is pressed inside a loop, this will turn the loop off. When pressed outside
a loop, this will activate the loop and start playback from its Loop In point. If a loop has not
been set, this button will have no effect.
•
Loop x1/2:
Cuts the currently playing loop in half. Press
Shift + Loop x1/2
to double the
length the currently playing loop.
Auto Loop Mode:
Hold
Pad Mode
and press the pad marked
Auto Loop
to assign the upper
4 pads to the functions listed below:
•
Auto 1:
Sets and starts playback of a 1-beat auto loop. Press
Shift + Auto 1
to set and start
playback of a 1/16-beat loop roll.
•
Auto 2:
Sets and starts playback of a 2-beat auto loop. Press
Shift + Auto 2
to set and start
playback of a 1/8-beat loop roll.
•
Auto 4:
Sets and starts playback of a 4-beat auto loop. Press
Shift + Auto 4
to set and start
playback of a 1/4-beat loop roll.
•
Auto 8:
Sets and starts playback of an 8-beat auto loop. Press
Shift + Auto 8
to set and
start playback of a 1/2-beat loop roll.
Sample Mode:
Hold
Pad Mode
and press the pad marked
Sampler
to assign the upper 4
pads to the functions listed below:
•
Sample 1:
Plays the sample assigned to Sample Pad 1. Press
Shift + Sample 1
to stop
playback, or to load a sample if the slot is empty.
•
Sample 2:
Plays the sample assigned to Sample Pad 2. Press
Shift + Sample 2
to stop
playback, or to load a sample if the slot is empty.
•
Sample 3:
Plays the sample assigned to Sample Pad 3. Press
Shift + Sample 3
to stop
playback, or to load a sample if the slot is empty.
•
Sample 4:
Plays the sample assigned to Sample Pad 4. Press
Shift + Sample 4
to stop
playback, or to load a sample if the slot is empty.
Demo Mode
Mixtrack Platinum will automatically enter a demonstration mode after 30 seconds if
connected to a computer via USB without opening the software. To exit Demo Mode, open
the Serato DJ Intro software.
Содержание MIXTRACK PLATINUM
Страница 28: ...numark com Manual Version 1 1 ...