Numa Champion RC300, Инструкции по уходу и обслуживанию

Страница: 12 / 27

Page 8
04/21/20
Champion
®
RC300
INSPECTION
•
All parts should be washed in a clean solvent before they are inspected and
reassembled.
WARNING
USE CLEANING FLUIDS THAT ARE NONFLAMMABLE AND AVOID
BREATHING THE FLUID VAPORS.
•
Handle all parts carefully, hardened parts may chip if dropped on a hard surface.
BACKHEAD
•
Inspect the threads for cracks and burrs.
• Remove all burrs on the thread with a fine file.
•
Replace if necessary.
CHECK VALVE SEAT
•
Inspect the outside diameters for nicks, burrs and scoring.
•
Remove all minor irregularities with emery cloth.
• Replace if necessary.
CHECK VALVE/CHECK VALVE SPRING
•
Inspect the outside diameters for nicks, burrs and scoring.
•
Remove all minor irregularities with emery cloth.
•
Replace if necessary.
COLLECTION TUBE & COLLECTION TUBE HOUSING
•
Inspect the outside diameters for nicks, burrs and scoring.
•
Remove all minor irregularities with emery cloth.
•
Check the I.D. size (at the chuck end) of the collection tube. The tube I.D. should be
no bigger than 7" (178 mm).
•
Inspect the weld at the collar for cracks.
•
Replace if necessary.