56
Notes:
• If the baby unit
is in Eco-Mode and the
parent unit moves out of range, the
connection indicator
will light up red.
You will also hear a beep every 30
seconds.
A red warning symbol will appear
on the screen.
• As soon as the parent unit
comes
back into range and the reason for the
interrupted connection is eliminated, the
connection indicator
lights up green
and the units are able to communicate
again.
Noise level indicators 22
above the
screen, consisting of four green LEDs and
one red LED, indicate the level of sound in
baby's room. They react differently,
according to the set VOX level (sensitivity).
The more LEDs light up, the louder the
sounds in baby's room.
Attention!
The noise level indicators are
switched off while the lullabies are playing,
because the device cannot distinguish
between the lullabies and baby sounds. You
will also be able to hear any sounds baby
makes in the background while the lullabies
are playing (see "6.11
6.3 Using the main menu
The main menu at the bottom of the screen
allows you to switch the available functions
on or off or change settings:
1. The main menu appears when you press
the button
.
2. Use the
button to select
a menu item.
The selected menu item will be shown in
red.
3. Press the
again to open the
menu item and view the possible settings
or submenus.
4. Use the
or
button to select a
setting or a submenu item.
The selected item is marked with a
green asterisk.
5. Press the
button
to confirm
the setting you have selected or open the
selected submenu.
6. You can press the
to exit
the current submenu and return to the
previous submenu.
7. To close the opened menu:
– wait 15 seconds without pressing any
buttons, or
– confirm a setting you have selected by
pressing the button
, or
– select the
EXIT
option in the main
menu and confirm this by pressing the
button
6.4 Screen brightness
You can adjust the screen brightness and
the brightness of the video to suit the
prevailing light conditions. In very light
conditions, you should set a higher screen
brightness to improve visibility. In low light,
you might feel uncomfortable with too bright
a screen. Adjust the screen brightness lower
in this case.
1. Press the
button
The menu bar with the main menu will
appear at the bottom of the screen.
2. Use the
or
button to
select the
Brightness
menu.
The selected symbol will be shown in red.
3. Press the
button
submenu.
4. Use the
or
button to select
the brightness you require.
The more bars you can see, the higher
the screen brightness. You have a choice
of 5 levels.
5. Press the
to confirm your
setting.
Содержание Eco Control Video Display 550VD
Страница 3: ...12 2 13 8 10 14 31 19 21 20 33 34 28 32 29 24 18 16 1 17 5 7 15 11 6 3 23 25 26 27 30 9 22 4 ...
Страница 4: ......
Страница 237: ......
