NUK Eco Control Video Display 550VD, Руководство по эксплуатации

Страница: 49 / 238

47
3.2 Overview of parent unit indicators
3.3 Overview of status bar indicators
Parent unit
Light Display Meaning
Connection
indicator 20
green Link ok (non Eco-Mode)
green blinking Link ok (Eco-Mode)
red blinking
1 beep every 30 s
Link not ok
Power-LED 21
green The parent unit is switched on and the
battery is fully charged
red
1 beep every 60 s
Low battery warning.
The parent unit will switch off
automatically within a very short time.
green blinking Charge battery indicator
Indicator
LEDs
22
1 - 5 LEDs
Visual baby sound indication. The more
LEDs are lit, the higher is the noise level
in the nursery.
Status line at top of screen
Symbol Significance
Received signal strength.
The more bars you can see, the better the connection between the
parent unit and the baby unit is. If the symbol is flashing and only
shows one bar, this indicates a bad connection.
Device is in Eco-Mode and baby is asleep. The screen shows no video
transmission.
Active camera.
Device is in patrol mode
Nightlight is on.
Nightlight is on with activated timer. When the set time has elapsed, the
symbol will automatically disappear and the nightlight of the baby unit
will switch off.
Reminder function is active. A few minutes before the set time has
elapsed, the symbol will start to flash. If this alarm is not
acknowledged, a new message will appear in the middle of the screen
when the time has elapsed. You will also hear a beep.
Parent unit is connected to mains power, but no battery is inserted.