Nugen 7000XTR, Руководство по обслуживанию, Страница: 16 / 44

Page 16
Master Programming Mode
Regeneration Cycle Step Programming
This program step programs the Regeneration Cycle step times 1 through 6. Please refer to the chart below
for regenerant flow default cycle steps and times. .
.
.
.
.
.
.
.
.
.
.
Auxiliary Relay Output
The next two displays are part of a series of settings used to program the optional relay output. The first .
setting turns the output on/off during regeneration only. The second turns the output on during service only,
every time a set volume of water used has accumulated. .
NOTE: When auxiliary outputs are in the OFF (default) setting, press the Up or Down buttons to set
the first setting. Then press the Extra Cycle button to advance to the second setting.
a. Timed Auxiliary Relay Output Window (Start & End Time Setting)
This option setting consists of two displays. The first display sets the turn-on time of the output, referenced
to the start of the first regeneration cycle. The second display sets the output turn-off time, referenced again
to the start of the first regeneration cycle. An OFF setting cancels this setting. All settings are in minutes and
output timing is synchronized with regeneration cycle timing. .
.
. Start Time: Any time during regeneration. .
. End Time: At start time, and anytime during the regeneration cycle. .
.
.
.
.
..
b. Chemical Pump Auxiliary Relay Output Window
This option setting consists of two displays. The first display sets the volume of water flow at which the output
turns on. The second display sets the on time (in seconds) of the output. .
— Activate output after volume set is reached. .
— Press the Shift button to select the digit you want to modify. .
— Press the Up or Down buttons to adjust this value. .
— Press the Extra Cycle button. .
.
.
.
11.
12.
Regenerant Flow Cycle 1 Time Cycle 2 Time Cycle 3 Time Cycle 4 Time Cycle 5 Time
Down Flow Back Wash
10.
Minutes
Brine
& Slow
Rinse
1 Hour
Rapid
Rinse
10.
Minutes
Brine Tank Fill 12 Minutes N/A N/A
CAUTION: Before entering Master Programming, please contact your local professional water dealer.