Nugen 7000XTR, Руководство по обслуживанию

Страница: 15 / 44

Page 15
Capacity Safety Factor
This program step is used to set the reserve capacity of the unit. This is a percentage by which the unit’s
capacity is reduced. .
— Press the Shift button to select the digit you want to modify. .
— Press the Up or Down buttons to adjust this value. .
— Press the Extra Cycle button. .
.
.
.
.
Volume Override
This program step is used to set the volume override of the unit. .
— Press the Shift button to select the digit you want to modify. .
— Press the Up or Down buttons to adjust this value. .
— Press the Extra Cycle button. .
.
.
.
.
Regeneration Day Override
This program step sets the maximum amount of time (in days) the unit can be in service without a
regeneration. .
— Press the Shift button to select the digit you want to modify. .
— Press the Up or Down buttons to adjust this value. .
— Press the Extra Cycle button. .
.
.
.
.
Regeneration Time
This program step sets the time of day for the regeneration to occur in delayed systems.
.
— Press the Shift button to select the digit you want to modify. .
— Press the Up or Down buttons to adjust this value. .
— Press the Extra Cycle button. .
.
.
.
.
.
7.
8.
9.
10.
Master Programming Mode
CAUTION: Before entering Master Programming, please contact your local professional water dealer.