NuAire LabGard NU-560-400 Скачать руководство пользователя страница 21

Страница: 21 / 103

OM0295

Rev 2 September 2020

Page 21 of 103

6.0

Operating the NU-560

6.1 Biosafety Cabinet Control

6.1.1 Overview

The Biosafety Cabinet Control (BSCC) system is designed to service the control requirements of the NU-560

Biosafety Cabinet. The control system is a self-contained microprocessor driven module that will perform the

following functions:

•

Easy use interface via

TOUCHLINK

color LCD.

•

Control blower DC ECM Motor via solid-state DC Motor Controller that provides automatic compensation

(constant volume control) for both filter loading and line voltage variances.

•

Intelliflow™ - Fast, accurate, reliable dual thermistor, airflow sensors and digital differential velocity

pressure flow grid powered by TSI to control and monitor cabinet airflows to setpoints.

•

Control lights via solid state switch.

•

Control outlets via solid state switch.

•

Display date/time w/battery backup.

•

Display blower and optional UV light run timers.

•

Display alarm setpoints high/low for error conditions (downflow/inflow).

•

Display complete calibration, option menu and diagnostic functions.

The NU-560 BSCC system offers the latest digital microprocessor design technology for improved cabinet

performance and safety. The control system uses a digital dual thermistor airflow sensor in the downflow stream

to monitor and control airflow to setpoints. The control system automatically compensates for filter loading,

voltage variances and other environmental effects. A digital differential velocity pressure glow grid in the exhaust

airstream monitors for exhaust volume and subsequent inflow velocity. Downflow velocity, exhaust volume and

inflow velocity are displayed on the

TOUCHLINK

LCD screen. The control system also monitors the sliding window

position with a micro switch for both window height and window closed positions.

The control system through the use of the front panel controls the on/off function of the fluorescent and

ultraviolet lights (optional), outlets and DC ECM motor/blower. The control system also allows contact closure

outputs for interaction with HVAC systems to optimize environmental performance.

User interface to the BSCC system is accomplished via the

TOUCHLINK

LCD. Basic use of the LFBSC is accomplished

via the icons located along the top of the screen as shown below. Touch an icon to turn on/off functions as

indicated. Each icon will illuminate with color to indicate when the function is turned on. The menu icon will

always prompt a menu screen to display. Selecting a menu item will continue the prompts until the desired

parameter is achieved. To return to the main menu, press the MENU icon repeatedly to reverse out of the

parameter menus.

Содержание LabGard NU-560-400








































































































Результаты поиска

Содержание LabGard NU-560-400

Отзывы:

Похожие инструкции для LabGard NU-560-400

Бренды по названию

Популярные бренды

NuAire LabGard NU-560-400, Руководство по эксплуатации и техническому обслуживанию

Результаты поиска

Содержание LabGard NU-560-400

Отзывы:

Похожие инструкции для LabGard NU-560-400

Бренды по названию

Популярные бренды