33
b.
Fit the outer door (Steel or Glass) with the 2 hinge pins provided to the right hand side, the door should then be closed and held shut
by the magnetic catches.
Important: With the Glass Door version take great care when fitting the door as it is quite heavy and cumbersome.
17.3 - FIREGUARDS
A fireguard is not supplied with the appliance however it is recommended that a fireguard is fitted if the fire is to be used in
the presence of young children, the elderly, the infirm and pets.
! VERY IMPORTANT !
THE INNER GLASS PANEL FOR ALL MODELS AND THE OUTER GLASS DOOR ON THE
GLASS MODEL WILL BECOME VERY HOT DURING OPERATION SO WE WOULD STRESS THE
USE OF A FIREGUARD IN SITUATIONS AS DETAILED ABOVE.
18.0 - BRIEFING THE CUSTOMER
a.
The installer should brief the customer on the Operation of the Control System and all aspects of the User Instructions.
b.
The instructions/with the door release tool should be handed to the customer for their safe keeping and future servicing.
c.
Show the customer how to open the outer door by pulling at the centre of the left hand side.
d.
Show the customer how the glass door can be opened for cleaning with the Pozidriv screwdriver provided. Stress that the fire must
not be operated with the glass door open.
e.
Explain and demonstrate to the customer that the batteries in the receiver and hand set should be replaced annually as the fire may
stop working.
f.
The customer should be briefed on the need for regular servicing; this will normally be once a year.
g.
Advise the customer that, apart from batteries, there are no user replaceable parts in the fire but for servicing and spares to contact
the local Nu-Flame Stockist.
h.
Advise the customer that under no circumstances must the fire be used if the glass door of the fire is in any way chipped, cracked or
damaged.
i.
Advise the customer that the flue and terminal guard will become very hot when the fire is in use.
j.
Advise the customer that the flue and terminal guard must not be covered as this will affect the safe operation of the fire.
! WARNING ! THE THERMOSTATIC THERMOTRONIC CONTROL SYSTEM PROVIDES THE MEANS FOR
UNATTENDED OPERATION OF THE FIRE IF THE PROGRAMS OR THERMOSTATE SETTINGS ARE USED -
THIS COULD POSE A DANGER IF COMBUSTIBLE MATERIALS ARE TOO CLOSE TO THE FIRE OR IF YOUNG
CHILDREN, THE ELDERLY, INFIRM OR PETS ARE LEFT UNATTENENDED.
WHEN THE FIRE IS FIRST OPERATED IT WILL CREATE AN ODOUR AS THE MANUFACTURING MATERIAL AND
BINDERS BURN OFF. THIS IS QUITE NORMAL AND WILL CLEAR AS THE FIRE IS USED OVER A FEW DAYS.
ABOUT THE FLAME PICTURE: THE SYNERGY RANGE HAVE A UNIQUE BURNER SYSTEM WHERE THE FLAME
SIZES AND COLURS WILL CHANGE LIKE A REAL FIRE AND WILL VARY FROM FIRE TO FIRE.
! IMPORTANT NOTES !
THE GLASS PANEL ON THIS FIRE WILL BECOME VERY HOT DURING OPERATION – ENSURE THE CUSTOMER
IS ADVISED OF THIS.
IT IS PERFECTLY NORMAL FOR THE FIRE TO MAKE POPPING & BURBLING NOISES WHEN LIT – ENSURE THE
CUSTOMER IS ADVISED OF THIS.
