23
The Picture Below Identifies The Lettered Coal Size Positions for Cross Checking
.
IMPORTANT: Finally Adjust The Coals to Ensure None Of The Letter Markings Can Be Seen.
Note: Any Coals Placed In The Flame Grooves Will Result In Sooting and Flames Flowing Towards The Glass Panel
IMPORTANT
Before fitting the glass panel with the 2 screws and screw driver provided,
check the condition of the glass and also ensure it is clean and free from any finger marks.
Note:
The glass is etched with the Nu-Flame logo and the glass is to be positioned with the logo in the bottom right hand corner.
Now Proceed to Section 16. - Testing, Commissioning & Use on Page 26
15.2 - ARRANGING THE WOOD EFFECT
a.
Slide the Front Moulded Wood piece
into positions between Front Heat Shield
and Burner as shown.
b.
Fit the Rear Wood Piece ensuring it is
up against the back board as shown.
K
K
K
J
J
J
J
J
J
J
J
J
J
J
G
G
G
G
G
G
Very Important
Ensure No Coals Are
Placed Within The
Flame Grooves