NTT docomo P-01C, Инструкция по эксплуатации

Страница: 97 / 155

95
Other
s
■
European RF Exposure Information
This mobile phone complies with the EU requirements for exposure to radio
waves.
Your mobile phone is a radio transceiver, designed and manufactured not to
exceed the SAR* limits** for exposure to radio-frequency (RF) energy, which
SAR* value, when tested for compliance against the standard was 0.369 W/kg.
While there may be differences between the SAR* levels of various phones
and at various positions, they all meet*** the EU requirements for RF
exposure.
*
The exposure standard for mobile phones employs a unit of measurement
known as the Specific Absorption Rate, or SAR.
** The SAR limit for mobile phones used by the public is 2.0 watts/kilogram
(W/kg) averaged over ten grams of tissue, recommended by The Council of
the European Union. The limit incorporates a substantial margin of safety to
give additional protection for the public and to account for any variations in
measurements.
*** Tests for SAR have been conducted using standard operating positions
with the phone transmitting at its highest certified power level in all tested
frequency bands. Although the SAR is determined at the highest certified
power level, the actual SAR level of the phone while operating can be well
below the maximum value. This is because the phone is designed to operate
at multiple power levels so as to use only the power required to reach the
network. In general, the closer you are to a base station antenna, the lower
the power output.
■
Declaration of Conformity
The product “P-01C” is declared to conform with the essential requirements
of European Union Directive 1999/5/EC Radio and Telecommunications
Terminal Equipment Directive 3.1(a), 3.1(b) and 3.2. The Declaration of
Conformity can be found on http://panasonic.net/pmc/support/index.html.
※
The European RTTE approval of this product is limited to the use of the P-01C
handset, Battery Pack and FOMA AC Adapter for Global use (100 to 240 V AC)
only. Other accessories are not part of the approval.
■
FCC Notice
⿠
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
⿠
Changes or modifications not expressly approved by the manufacturer
responsible for compliance could void the user’s authority to operate the
equipment.