NTT docomo P-01C, Инструкция по эксплуатации

Страница: 42 / 155

40
Connect
Press
+ V o
(Redial) or
+ C o
(Received
calls) from the Stand-by display.
1
Select a call record. 2
Press
- d
to make a call.
⿠
To make a videophone call, press
+ l
( )
instead of
d
.
3
■
Notifying Your Caller ID on the Other
Party’s Phone
+ m from the Stand-by display
▶ Set./Service ▶ NW services
▶
Caller ID notifi cation
1
Select “Activate/Deactivate”. 2
Select “Activate”. 3
■
Making an International Call
- 0
(for at least one second) from the
Stand-by display
▶
Enter numbers in
order of country/area code
→
area code
(city code)
→
destination phone number.
⿠
When the area code (city code) begins with “0”,
enter the area code without “0”. However, include
“0” when making a call to some countries or
regions such as Italy.
1
Press - d .
⿠
Press
+ c
( ) to make a videophone call.
2
Select “Dial”.
3
You can use WORLD CALL to make an international
call from Japan.
⿠
Contact “docomo Information Center” on the back page
of this manual for inquiries about WORLD CALL.
⿠
When using international carriers other than DOCOMO,
contact them.
⿠
DOCOMO videophones conform to “3G-324M
standardized by the international standard 3GPP”.
You cannot connect to the videophone using a
different format.
⿠
If you hear the guidance requesting your caller ID,
either set the Caller ID notifi cation or add “186” fi rst
and then try calling again.
■
Making a Call with Redial/Received
Calls