NTN-SNR AXC100Z, Руководство пользователя

Страница: 213 / 244

211
Figure 6.48 __ AXS280TV with balance cylinder
Table 6.44 __ Dimensions axis with safety break
Figure 6.50 __ Axis with safety break
Type Breake type Shaft - Ø Holding force W H H1 W1 G
[mm] [N] [mm] [mm] [mm] [mm]
AXC120A RBPS2000 20 10 000 294,0 246,0 191,0 125,0 G1/8"
AXDL160A RBPS1000 10 3 500 217,5 119,0 73,0 110,0 M5
AXDL240A RBPS2000 20 10 000 340,5 153,0 103,5 171,0 G1/8"
AXS200MS RBPS2000 20 10 000 300,5 168,0 111,0 151,0 G1/8"
AXS120TV on request
AXS230MB RBPS2000 20 10 000 388,0 219,0 169,0 166,0 G1/8"
AXS280TV RBPS2000 20 10 000 425,0 194,7 145,2 191,0 G1/8"
AXS280MB RBPS2800 28 18 000 420,0 163,0 95,5 212,5 G1/8"
6.9 Safety breaks
Lifting axis, designed for higher loads, can optionally be equipped with a safety brake as a safety option (Chapter 8.3.2).
The safety brakes have the following characteristics:
• Operating pressure 4…6 bar
• Pressureless active
• 2 000 breaking cycles respectively 5 000 000 clamping cycles life time
• Reaction time <30ms
• Optional with initiator to scan the actuating situation
Safety breaks can not be chosen in combination with the option "Balance cylinder".