NTN-SNR AXC100Z, Руководство пользователя

Страница: 168 / 244

166
6.1.2 Sliding blocks
Sliding blocks (Figure 6.4) are available for Linear Axis of the series AXC, AXDL, AXLT and AXS.
The distance between the sliding blocks should be selected depending on the load and the required straightness and the rigidity.
Four different designs of sliding blocks are available. The dimensions and type codes, including the ID - Numbers of the sliding blocks
are shown in Figure 6.5 and Table 6.3.
Design type E / F
• Standard sliding block
• Steel galvanized
• Can be swiveled into any position
• Fixation via spring-loaded ball
Design type R
• For effective component mounting
• Zinc diecasting
• Is pre-assembled on the component and can be
inserted in any position
• Locking by tightening the screw
Design type S
• Heavy load sliding block
• Steel galvanized
• Pushed in from the profile end
• For groove width 8,2 fixation via spring-loaded ball
Figure 6.5 ___ Sliding block designs
Figure 6.6 ___ Sliding block dimensions