NTN-SNR AXC100Z, Руководство пользователя

Страница: 180 / 244

178
6.2 Drive options
6.2.1 Plug-in shaft
Plug-in shafts are common variants of the form-fitting drive
adaption (Figure 6.23), which is available for Linear Axis of the
AXC_Z, AXC_A, AXDL_Z and AXDL_A series.
For optimal alignment of the fastening elements for the drive,
it is necessary to specify the mounting side for the machining
of the profile. The delivery includes the corresponding sliding
blocks for the drive fixing. The dimensions are shown in Figure
6.24 and Table 6.15. For applications with higher dynamics,
we recommend force and form-fitting drive adaptations with
integrated couplings as described in chapter 6.2.2 or 6.2.4.
Figure 6.23 __ Plug-in shaft
Figure 6.24 __ Dimensions plug-in shaft and mounting dimensions
The dimensions of the plug-in shafts are shown in Figure 6.24 and Table 6.15
1 sliding block / Threaded hole
2 machined mounting surface for
the drive adaption
Table 6.15 ___ Dimensions plug-in shaft
Type a b c 1 d h6 d2 e f g i l s
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
AXC40Z
23 26H7x1 1 10 M4x7 34,0 9,90 8,10 29,5 30 M3x5
AXC40A
AXC60Z
34 47H7x1 1 14 M5x8 54,0 22,50 17,50 30,0 30 M5x6
AXC60A
AXC80Z
42 68H7x2 2 20 M6x10 72,0 23,00 20,50 39,3 40 M5x9
AXC80A
AXC100Z
53 90H8x2 25 M10x17 85,0 42,50 42,50 53,5 50 M8x12
AXC120Z 61 102H8x2 2 30 M10x17 104,0 42,50 42,50 59,5 60 M8x12
AXC120A
61
(Ø162) 2
102H8x2
(110H8x3,5) 2
2 30 M10x17
104
(91,9) 2
42,50
(45,95) 2
42,50
(45,95) 2
59,5 60
M8x12
(M8x13) 2
AXDL110Z 60H8x19 16 M5x8 48,1 24,05 24,05 55,5 30 M5x10
AXDL160Z 75H8x41 25 M10x17 66,0 25,00 25,00 92,3 50 M6x15
AXDL160A 80H8x3 -- -- 70,7 35,35 35,35 -- -- M6x12
AXDL240Z 90H8x53 30 M10x17 70,7 35,35 35,35 113,5 60 M6x18
AXDL240A 110H8x3,5 30 M10x17 91,9 45,95 45,95 113,5 60 M8x15,5
1 - Not applicable for drive adaption WD
2 - Dimension of the machined surface from the opposite side