NTI VOPEX SERIES CAT5 USB KVM SPLITTER/EXTENDER
8
CONNECT THE CATX CABLE
Make sure the CATx cable has been installed in accordance with the “Preparation for Installation” instructions on page 4.
Connect a CATx cable to one of the ports marked “CATx Output” on the VOPEX. Connect the other end of that cable
to the “Cat x” port on a Remote Unit. When properly inserted the CATx cable end should snap into place.
Repeat for each Remote Unit installed.
WARNING: Never connect the VOPEX to an Ethernet card, Ethernet router, hub or switch or other
Ethernet RJ45 connector of an Ethernet device. Damage to devices connected to the Ethernet may result.
Figure 4- Connect a CATx cable between the VOPEX and each Remote Unit
!
