NTI VOPEX SERIES CAT5 USB KVM SPLITTER/EXTENDER
17
To proceed to upgrade the Remote controller, press
<r>
from Terminal window. The following message should appear on
the screen:
Erasing flash memory…
Memory successfully erased
Send .bin file using Xmodem protocol..
At this point the binary file
c5usbvu-rcsx-x.bin
must be sent. To do this, from HyperTerminal:
1. go to “Transfer” menu in the Menu Bar of the HyperTerminal window
2. click the item “Send File …”
3. in the dialog box which pops up on the screen, browse for the file to be sent and select it
4. select “Xmodem” from the Protocol drop-down menu
5. press “Send” button
The transmission will start shortly. Wait until the transmission is finished. There will be some pauses during transmission,
since the processor writes blocks of 4KB.
When the transmission is complete, the HyperTerminal window should show the following status message and return to the
menu prompt:
Device successfully programmed!
>
To exit from the bootloader, press
<x>
.
