NTI VOPEX SERIES CAT5 USB KVM SPLITTER/EXTENDER
1
INTRODUCTION
The VOPEX
®
VGA USB KVM Splitter with built-in USB hub extends one USB computer (PC, SUN, MAC) to up to four users
(four USB keyboards, mice and VGA monitors) connected to XTENDEX Series Remote Units.
Options:
For support for up to eight users, order VOPEX-C5USBVA-
8
.
For support for
USB touch screen monitor, CAC card reader, or interactive whiteboard, add a “U” to the part number (order
VOPEX-C5USBV
U
A-x (x= 4 or 8))
Remote video and audio devices can be located as much as 1000 feet away from the source via Category 5e/6/6A/7
unshielded or shielded (see chart on page 18) twisted-pair cable. The VOPEX can optionally supply video and audio to
devices located near the source and provides support for any USB 2.0 full speed device connected to its ports.
The VOPEX Series VGA Splitter/Extender is extremely simple to install and has been thoroughly tested to insure reliable
performance. Through the use of CATx unshielded twisted-pair cable it is possible to economically increase the flexibility of
a computer system. Here are some of the features and ways this can benefit the user:
•
Allows the placement of monitors, USB devices and self-powered stereo speakers/amplifiers in different remote
locations where only these parts are needed.
•
Provides crisp and clear resolution up to 1080p
•
Video quality adjustment is automatic for varying lengths of CATx cable
•
Digital transmission of audio signals reduces any loss in quality.
•
Audio can be broadcast to self-powered stereo speakers at each remote location and to the local unit.
MATERIALS
Materials Included with this kit:
¾
VOPEX-C5USBV(U)A-x (x= 4 or 8 for number of CATx ports)
¾
120VAC or 240VAC at 50 or 60Hz-5VDC/2.0A AC Adapter (4 Port)
or
3.0A AC Adapter (8 Port)
¾
VEXT-3 3 Foot VGA Male-Female Video Cable
¾
USB2-AB-1M-5T 1 Meter USB Male Type A-Male Type B cable
¾
SA-3-MM 3 Foot 3.5mm male-male stereo plug -stereo plug cable
¾
DB9F-RJ45F- Adapter (CT6182) (VOPEX-C5USBV
U
(A)-4/-8 models only)
¾
5 Foot CAT5 Patch Cable (VOPEX-C5USBV
U
(A)-4/-8 models only)
¾
CD with a pdf file of this manual
Additional materials not supplied but are required:
¾
CAT5/5e/6 Solid UTP/STP EIA/TIA 568B cable(s) terminated with RJ45 connectors wired straight thru- pin 1 to pin 1,
etc. (see page 19 for proper EIA/TIA 568B wiring method) (see also limitations on page 4 and resolution chart on page
18)
¾
One or more of the following XTENDEX Remote Units:
Compatible Splitter
Remote Unit
Supported Features
ST-C5USBV-R-1000S
USB KVM
VOPEX-C5USBVA-x
ST-C5USBVA-R-1000S
USB KVM + Audio
ST-C5USBVU-R-1000S
USB KVM + Additional USB Port +
Firmware Upgradable
VOPEX-C5USBVUA-x
ST-C5USBVUA-R-1000S USB
KVM
+ Additional USB Port +
Audio+Firmware Upgradable
Contact your nearest NTI distributor or NTI directly for all of your KVM needs at 800-RGB-TECH (800-742-8324) in US &
Canada or 330-562-7070 (Worldwide) or at our website at www.networktechinc.com and we will be happy to be of
assistance.
