NTI VEEMUX AUDIO/VIDEO MATRIX SWITCH
43
5.
Press <
L>
to load the firmware (hex) file. This will prepare the file for transfer to the VEEMUX-A.
If the file fails to load, press the <
C>
key to clear the old firmware, and press <
L>
to load it again.
6.
When the message
“
Start sending file via Xmodem protocol..
”
' appears, the VEEMUX-A is waiting for the Firmware file to
be uploaded.
A box or some other characters may be displayed repeatedly on the line below this message while the VEEMUX-A waits;
this is normal.
7.
Click “
Transfer” > “Send File
...” from the HyperTerminal menu bar
8.
Select “
Xmodem”
from the
Protocol
drop-down menu,
9.
Click “
Browse”
. Go to the directory containing the firmware to load into the VEEMUX-A. Select to highlight the hex file,
click “
Open”
, then click “
Send”
.
10.
A window will appear displaying information about the upload operation, including the upload process. It may take a few
seconds for the upload to begin.
DO NOT DISRUPT POWER while the firmware is uploading to the VEEMUX-A.
11.
When the upload is completed, the command prompt will return. Power the VEEMUX-A OFF, then ON again. Upgrading
is complete, and the VEEMUX-A is ready to use.
