NTI MINI SERVER ENVIRONMENT MONITORING SYSTEM
14
USE AND OPERATION VIA WEB INTERFACE
A user may monitor and configure the settings of any device connected to the ENVIROMUX-MINI using the Web Interface via a
web browser (see supported browsers on page 6). To enable the Web Interface, connect the ENVIROMUX-MINI to the Ethernet
(page 9). A user can login to the default IP address (shown below), or if the IP address is not known, use the Device Discovery
Tool (page 13) to determine and, if desired, setup the network settings. In either case, to access the web interface controls, the
user must log in.
Log In
To access the web interface, type the current IP address into the address bar of the web browser. (The default IP address is
shown below):
Note: If the HTTP Server Port number is changed (page 16) from port 80 (default), then the port number will need to be
added to the IP address (i.e. if the port number is changed to 95, then the IP address would be http://192.168.1.21:95)
A log in prompt requiring a username and password will appear:
Username = Administrator
(uppercase letter for "A"
only)
Password = admin
(lower case letters only)
Note: usernames and passwords are case
sensitive
Figure 10- Login prompt to access web interface
With a successful log in, a screen similar to the following will appear:
Figure 11- Administrator's Status Summary page and menu
http://192.168.1.21
