NTI MINI SERVER ENVIRONMENT MONITORING SYSTEM
7
INSTALLATION
Mount the Unit
The ENVIROMUX-MINI can either be placed on a solid surface, mounted to a wall, or mounted to an accessible surface within
rack (Zero-RU). To mount to a wall or other surface, first remove the screws holding the mounting tabs to the rear of the box.
Rotate the tabs such that they extend from the back of the box, and attach the tabs with the screws removed. Now the
ENVIROMUX-MINI can be secured to any convenient surface. Use appropriate hardware (not supplied) when mounting.
Figure 1- Rotate the tabs for Zero-RU mounting
DIN Rail Mounting
The ENVIROMUX-MINI-D is for mounting to a DIN rails in a server rack. It is supplied with a DIN rail clip on the back. With the
clip installed, it can be readily snapped to a DIN rail and easily removed. Press the side of the clip with the metal spring in it
against the channel, rotate the ENVIROMUX-MINI-D into position, and release the pressure. Reverse the procedure to remove it.
Figure 2- DIN Rail clip and unit mounted to a rail
Spring
DIN Rail
Bracket
DIN Rail
