NTI AG LinMot C1100 Series, Руководство по установке

Страница: 15 / 27

LinMot Installation Guide C1100
7.11 S4
S4 Bus Termination (on GP drives only)
S4 Switch 4: Bootstrap
Switch 3: Termination CAN on/off
Switch 2: Termination RS485 on/off
Switch 1: No Function, for future use
Factory settings: Switch 3 “on”, all other switches “off”
7.12 S5
S5 Bus Termination (on EC and PN drives only)
S5 Bootstrap
7.13 LEDs
LEDs State Display
Green
Yellow
Yellow
Red 24V Logic Supply OK
Motor Enabled / Error Code Low Nibble
Warning / Error Code High Nibble
Error
7.14 RT BUS LEDs
RT Bus LEDs RT Bus State Display (only on EC or PN drives)
Green
Red OK
Error
The use of these LEDs depends on the type of fieldbus which is used. Please see the corresponding
manual for further information.
NTI AG / LinMot
®
www.LinMot.com Page 15/27
C
11
00
I
n
st
al
la
ti
on
G
ui
de