NT-ware uniFLOW Release Station, Руководство по настройке

Страница: 39 / 56

uniFLOW Release Station
25
There are two ways to update the firmware of the uniFLOW Release Station:
Via USB Drive
1.
Copy the downloaded .apk to the root folder of an USB drive formatted with FAT
or FAT32 file system.
2.
Plug-in the USB drive while the uniFLOW Release Station app is running. The
uniFLOW Release Station will detect the USB drive mounting and read the first
.apk file it finds in the root folder.
3.
A pop-up window appears on the uniFLOW Release Station asking you to install
the application. Select
Install .
4.
After installation, select Open to start the new uniFLOW Release Station firmware.
Via Web Browser
1.
Open http://<uniFLOW_Release_Station>:8002/upgrade.htm in a browser to
access the
Release Station - Upgrade web page.
2.
Under Upload package , click the Browse button and select downloaded .apk file.
3.
Click Upload & Install and wait until the web page displays sent .
4.
A pop-up window appears on the uniFLOW Release Station asking you to install
the application. Select
Install .
5.
After installation select Open to start the new uniFLOW Release Station firmware.
You can check the new version of the firmware by hitting the top bar of the screen to
open the
About page. You can see the build version there.
Only official NT-ware signed .apk files can be used for the firmware update.
9 Job Release
The core functionality of the uniFLOW Release Station is the job release of your print
jobs in the secure print queue.
After you have logged in with your PIN or card and have selected your desired cost
center (see below), your secure print queue is displayed. Here, the following actions
are available:

Print+Delete :
Prints the selected jobs and deletes them.

Delete :
Deletes the selected jobs with without printing them.

Print+Keep :
Prints the selected jobs and keeps in in the queue.