NT-ware uniFLOW Release Station, Руководство по настройке

Страница: 20 / 56

uniFLOW Release Station
6
7 Installation
Required Components

uniFLOW Release Station.

Power supply for the uniFLOW Release Station.

Printer.

Network cable (delivered with the uniFLOW Release Station).
Optional Components

Copy control cable for the manufacturer and model of your device.
Please refer to the NT-ware DIF Portal ( http://difportal.nt-ware.net ) or to the
Accessory Guide on the NT-ware Partner Site ( https://web.nt-ware.net/partner/ ) for
more information about which copy control cable is required for your specific
machine(s).
Installation
1.
Switch off the desired printer.
2.
Disconnect the printer from the network.
3.
Attach network cable of the printer to one of the two network ports.
4.
Optional: In case copy accounting is required on an MFP: Attach the uniFLOW
Release Station with the respective copy control cable to the MFP.
Connecting the copy control cable to your MFP might require
additional installation steps.
5.
Attach the uniFLOW Release Station to the network.
6.
Attach the power supply to the uniFLOW Release Station.
7.
The uniFLOW Release Station boots up.
8.
Switch on the printer.
The uniFLOW Release Station is now ready for more advanced configurations. For the
uniFLOW Release Station configuration, see chapter Configuration (on page
6 ).
8 Configuration
The uniFLOW Release Station works without any additional configuration if your
network has a DHCP server configured to provide an IP address.