NT-ware uniFLOW Release Station, Руководство по настройке

Страница: 19 / 56

uniFLOW Release Station
5
Status LED color/Beep
Booting up yellow, then green with beep
Not synchronized flashing yellow
Synchronized (idle) steady red
Reading/Hold green with beep
uniFLOW Release Station Touch
The uniFLOW Release Station Touch does not have any LEDs. Neither does it have a
beeper.
Network Port LED (all models)
Status LED color
A link to a network is established. green
A link to a network is established
and data is transmitting.
green flashing
The network speed is 100 Mbit/s. yellow ON
The network speed is 10 Mbit/s. yellow OFF
6 Copy Control Cables
A copy control cable is needed to make use of uniFLOW copy accounting and device
lock options. The cables are developed by NT-ware to make them fit to the uniFLOW
Release Station.

Copy control cables are sold separately and are not included by default with the
uniFLOW Release Station.

Copy control cables have to be configured via the PORTS.ini file. For more
information, refer to chapter Port Configuration (on page
16 ).
This is not necessary, if the uniFLOW Release Station is connected to uniFLOW
Online.
For a detailed list of all available copy control cables, please refer to the NT-ware DIF
Portal (
http://difportal.nt-ware.net ) or to the NT-ware Accessory Guide which can be
found on the NT-ware Partner Site ( https://web.nt-ware.net/partner/ ).