NT-ware uniFLOW Release Station, Руководство по настройке

Страница: 28 / 56

uniFLOW Release Station
14
After login, you will be automatically transported to the uniFLOW Release Station web
page.
The following chapters explain the different web pages.
8.2.1 uniFLOW Release Station
The uniFLOW Release Station site gives information about the following:

Serial Number:
This is the serial number of the uniFLOW Release Station itself. It is used to select
a uniFLOW Release Station during the printer wizard. You will also find this
number on a sticker on the back of each uniFLOW Release Station.
The serial number of the uniFLOW Release Station is derived from its MAC address
(without colons and leading zeros).

Software Version:
The current firmware version of the uniFLOW Release Station.

Last ID (raw):
This option is only displayed if Restrict HTTP Access to IP is set.
It shows the last read card number without code conversion (raw data).

Name:
You can change the default name of the uniFLOW Release Station for an easier
identification of the device itself, for example the name of the associated printer.
The name will also appear as
Model name under the List view of the uniFLOW EAI
settings.
The preconfigured default name is "uniFLOW Release Station".

Restrict HTTP Access to IP:
Only the computer with the IP address entered here is able to open the websites
of the uniFLOW Release Station. If this IP address is not the uniFLOW server, then
you are not able to access the websites from the uniFLOW server. However, this
does not affect necessary communication between the uniFLOW server and the
uniFLOW Release Station. If left blank, there is no access limitation.