NSS SWIFTVAC 6, Руководство по эксплуатации, Страница: 4 / 16

NOISE AND VIBRATION
SPECIFICATIONS
WEIGHT 9.8lbs [4.4kg]
AIRFLOW 152 CFM [71.7 L/s]
STATIC WATER LIFT 101in [25.2 kPa]
CURRENT DRAW 11.4A
POWER 1328W
GENERAL INFORMATION

Now that the machine is unpacked remember to
recycle all packing materials.

Inspect the machine for damage or missing
components. If damage is found, contact the local
freight company to file a freight claim.
ASSEMBLY

The Swiftvac 6 requires minimal assembly. The
filter bags must be installed properly prior to using
this machine. Use of the paper filter facilitate
easier disposal of debris.

This machine is packed to enable the user to
simply remove it from the carton, assemble and
attach the wand, plug in the machine and be ready
to operate.
MACHINE COMPONENTS
Top Cover
The tank closes with a top cover that can be adjusted
for either right or left-handed use.
Harness

The hip belt is 2 inches wide, adjustable, and
padded for comfort.

The shoulder straps are adjustable for proper fit on
the machine operator.

The harness should be adjusted by tightening the
waist belt so 80% of the machine weight is on the
operator’s hips. The remaining weight is on the
shoulders. The shoulder straps should be fairly
loose.
Filters

The re-useable cloth filter bag must be used with
the paper HEPA filter insert.

The paper HEPA filter bag must be inserted inside
a cloth bag. The cloth bag supports the paper
HEPA filter. Without the cloth bag the paper HEPA
filter will burst or be blown out of position.

Paper HEPA filter bags are used for easy removal
of debris from the cloth filter bag. Remove the
paper HEPA filter bag when full, dispose of it, and
replace with a new paper HEPA filter bag.

The HEPA dome filter is used to keep dust and
debris from getting into the motor. This should be
replaced every six months.

The noise filter is used to keep contaminants from
being exhausted back into the air.
NOISE
Sound pressure level at Operator
position per ISO 11201.
67 dB(A)