NSR Marine NVR-9000, Руководство пользователя

Страница: 70 / 80

NEB-2000C-VDR USER MANUAL
NEB-2000C-VDR UM.E 20200220-06 13
3.3 MANUAL ACTIVATION
If there is enough time when in distress, the beacon can be taken out from the container and brought to
life raft. In such case, the beacon can be manually activated.
Take the below steps to remove the beacon from the container:
Pull out the lock pin and open the cover of
container.
There are 3 ways to remove the cable:
1. Unplug the connector of data cable.
2. Cut the cable by tool.
3. Pull out the safe pin on the NHR-100 to release
the ejector. The data cable will be cut.
Take the beacon out of the container.
Then take the below steps to manually activate the beacon:
1)
Lift up the yellow cover. The red protection tab will be broken.
2) Slide the switch fully to ON position at left side.
3) The beacon is activated and transmits distress signals.
4) Hold or put on the surface as upright as possible, and it must have a clear view of the sky for
proper operation.