NSR Marine NVR-9000, Руководство пользователя

Страница: 67 / 80

NEB-2000C-VDR USER MANUAL
NEB-2000C-VDR UM.E 20200220-06 10
3. OPERATION
3.1 ACTIVATION
The beacon can be activated by two processes: automatic activation and manual activation. When
activated, the beacon will behave in below steps.
Step 1.
LED test, all LED flash once one by one.
Step 2. Strobe light flickers every 3 seconds.
Step 3. GPS LOCK LED flickers while acquiring GPS data.
Step 4. 406MHz LED flickers while transmitting on 406MHz.
Step 5. 121MHz LED flickers while transmitting on 121MHz.
NOTE:
Once the beacon is activated, strobe light will be flashing immediately by every 3 seconds, however it
won’t transmit a distress alert in approximately 2 minutes. This gives you time to turn it off immediately
in case of being activated by mistake.
When the beacon is activated, the below guidance is helpful.
 The beacon should be kept upright. If possible, it would be better to be held.
 The beacon should be placed in the open place to sky.

There should be no overhangs above the beacon.
 Do not place the beacon close to any large structures.
 Do not lay down the beacon.
 In a life raft, hold the beacon up as high as possible.
 Let the beacon to float in the sea when necessary.
 Do not touch the antenna with hand.