NSR Marine NVR-9000, Руководство пользователя

Страница: 41 / 80

NVR-9000 & NVR-9000S USER MANUAL
NVR-9000 & NVR-9000S UM.E 20200220-11 35
indicate.
Switch "1" represents the input of the closed state (dry contact) and high level (wet
contacts), at this moment the LED on the board next to the switch interface is bright.
Switch "0" represents the open circuit state (dry contact) and low level (wet contact), at
this time the LED on the board next to the switch interface board is off.
The CH57-CH64 switch can be configured as dry or wet contact contacts are configured, through the
jumper on the circuit board is configured.
In the configuration software, Run and Stop are represented by 0 and 1 in the switch volume channel
S001.
"1" and "0" represents the state, the user can customize according to the specific circumstances.
In the VDRPlayer
When CH1 is 0 displays CH1 Stop, at the same time the lights out, followed by the name of the
equipment;