English
- - - - - - - - - - - - - - - - - - - - - -
5
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
8
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
9
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
9
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 13
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 18
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 20
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 21
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 21
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 22
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 22
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 24
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 25
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 27
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 27
150kHz to 80MHz
d=1.2
P
4
5
CONTENTS
Cautions for handling and operation
1. FEATURES
2. SPECIFICATION
3. Name of each part
4. Parts and its function
5. Operations
6. Convenient Function
7. Cleaning
8. Sterilization
9. Motor Cap
10. Safety System
11. Changing Batteries
12. Error Code
13. Troubleshooting
14. Warranty
15. Disposing Product
Recommended separation distances between portable and mobile RF communications
equipment and the ENDO-MATE TC2
The ENDO-MATE TC2 is intended for use in an electromagnetic environment in which radiated RF
disturbances are controlled. The customer or the user of the ENDO-MATE TC2 can help prevent
electromagnetic interference by maintaining a minimum distance between portable and mobile RF
communications equipment (transmitters) and the ENDO-MATE TC2 as recommended below,
according to the maximum output power of the communications equipment.
For transmitters rated at a maximum output power not listed above, the recommended separation
distance d in meters (m) can be estimated using the equation applicable to the frequency of the
transmitter, where
P
is the maximum output power rating of the transmitter in watts (W) according
to the transmitter manufacturer.
Rated maximum output
power of transmitter
W
0.01
800MHz to 2.5GHz
d=2.3
P
80MHz to 800MHz
d=1.2
P
0.12 0.23
0.12
0.1 0.38
0.73
0.38
1 1.2
2.3
1.2
10 3.8
7.3
3.8
NOTE 1
At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2
These guidelines may not apply in all situations.
Electromagnetic propagation is affected by absorption and reflection from structures, objects and
people.
100 12
23
12
Separation distance according to frequency of transmitter
m
Cautions for handling and operation
Read these safety cautions thoroughly before use and operate the product properly.
These indicators are to allow you to use the product safely and prevent danger and harm to
you and others. These are classified by degree of danger, damage and seriousness. All
indicators concern safety, therefore always follow them.
Degree of danger or damage and seriousness
Explains an instruction where death or serious injury may occur.
Explains an instruction where bodily injury or damage to device may
occur.
Explains an instruction where possibility for minor to medium bodily
injury or damage to device may exist.
Explains an instruction that should be observed for safety reasons.
Classification
DANGER
WARNING
CAUTION
N O T I C E
