Page 8 of 32
© Brüel & Kjær Vibro
● C104958.002 / V04
Technical alterations reserved!
EN
Assembly of the sensor:
CAUTION!
The ceramic sensor tip is sensitive to shock. Transport and store the displacement
sensor only with the included protective rubber cap. Always keep the protective rubber
cap for later use.
To avoid damage, make sure, especially during assembly and while operating the
machine, that the sensor tip does not come into contact with other objects.
Loose ceramic particles can lead to damage within the machine.
Check the tip of the sensor for damage before every assembly. Never install a defective
sensor.
Assembly, disassembly or replacement of components:
NOTE!
Never pull the cable to open the connection. Doing so may damage the cable and the
connector ends.
