OPERATION
To raise lighting levels:
Press and hold the increase button of the zone desired. The 400cp will then take control of all dimmer channels
assigned to the selected zone and increase lighting levels at the programmed fade rate. Release button when correct
lighting levels are attained.
To lower lighting levels:
Press and hold the decrease button of the zone desired. The 400cp will then take control of all dimmer channels
assigned to the selected zone and decrease lighting levels at the programmed fade rate. Release button when correct
lighting levels are attained.
To restore control from a console:
Simply perform a change in the channel level from the console. The lighting channel will then fade back to the
new console level at the same fade rate as last commanded by the 400CP for that channel. Once the console level
matches or is moved past the lighting level, full console control will be resumed for that channel.
400CP REMOTE CONTROL PANEL
OPERATION
Software Revision 3.00, Version C
To raise lighting levels:
NSI CORPORATION
11
